Connect this timer controller to your ConnectPro starter cable, before your lights, to give your display ultimate convenience! You can choose between the 6 or 8 hour timer options, depending on what best suits you.

Easy to use, just press the button on the timer box to turn your lights on, press again to activate the 6 hour timer (the light will display green), then press again to activate the 8 hour timer (the light will display red). Press once more to turn the lights off, it’s as simple as that.

The timer operates on a 24 hour cycle; if you select the 6 hour timer, your lights will stay on for 6 hours, turn off for 18 hours, then automatically turn back on at the same time each day. With the 8 hour timer, your lights will stay in for 8 hours, turn off for 16 hours, then automatically turn back on at the same time each day.

Compatible with all the lights in the ConnectPro range, from festoons and strings, to silhouettes and icicles, this timer controller is rated IP65, meaning it’s suitable for prolonged outdoor use.

There are two sections of cable, each 15cm in length, one leading to the starter cable and one leading to the lights.

Please note: The timer controller will only power up to a maximum wattage of 250W. See below for the maximum number of 5m sets for each range, and do not exceed this maximum number:

• Cluster Lights = 14 Sets
• Fairy Lights = 70 Sets
• Festoon Lights = 70 Sets
• Icicle Lights = 35 Sets